Turning Technologies WorkSpace - Manual (Page 36)

WorkSpace for PC 36
5 Drag and drop a device to the area needed.
NOTE
It is recommended to leave one device out to keep control of all users. Ideally, this will be the
"presenter" device.
6 Click OK after all devices have been dropped into place.
Setting Up Quick Start
1 Connect up to nine devices in Device Manager.
IMPORTANT
Do NOT add the device that will be used to control the main toolbar or the other devices unless it
is set to Presenter within Device Manager.
2 Click the Multi-User Menu icon on the Page Functions toolbar.
3 Mouse over Quick Start and select either Full Screen or a specified area.
4 Click the Multi-User Menu icon to access Edit Devices.
The View Devices window opens.
Drag and drop, or remove devices. If necessary, click the Device Manager icon in the lower right corner to access
Device Manager.
5 To close Quick Start, click the Multi-User Menu icon and select Multi-User.
Selecting the Presenter
The “presenter” in Multi-User Mode controls when multi-user mode
begins and ends.
1 Open Device Manager.
Images of each available device appear in the main window.
2 Select the icon for the desired presenter device.
3 From the menu bar, click Options and select Set Presenter.
The selected device is now the presenter device.
Presenter Tools
In Multi-User Mode, the following tools are available to the presenter in addition to those on the main toolbar:
Presenter Functions
Icon Name Description
Zoom User Selects an individual user and enlarges their work within the entire multi-user window
Return to
Settings
Returns the user back to Multi-User view
einstruction.com/workspace-overview