StorCase Technology InfoStation 12-Bay 4U Ultra160/SATA - Manual (Page 50)

InfoStation 12-bay RAID User's Guide - Rev. C00 StorCase Technology, Inc.
RAID Controller Configuration 39
6 RAID Functions
Saving Configurations
CAUTION: Initialization of an existing array will erase all data on the array!
Checking of an existing array will permanently erase on the array!
6 RAID Functions
6.9 Update ROM
Select Number of
Disks
* Submenus are the same
as 6.8.1 Array 1
Stop / Start
Stop / Start
6.1 Init R5/R3
6.2 R5/R3 Check
6.4 Stop Modem
6.3 Beeper
6.5 Add Disk
6.6 Remove Disk
6.8 Expand Array
6.7 Statistic
Select Array
Select Array
No / Yes
Clear / Enable /
Disable
Select Disk
Number
Select Disk
Number
6.8.1 Array 1
6.8.2 Array 2*
6.8.4 Array 4*
6.8.3 Array 3*
Yes / No
RAID Functions Menu
6.1 Init R5/R3
This function enables the user to initialize an existing RAID 5 or RAID 3 array.
Select either Array 1, 2, 3, or 4 and then either Stop (default) or Start.
6.2 R5/R3 Check
This function enables the user to check an existing RAID 5 or RAID 3 array for errors.
Select either Array 1, 2, 3, or 4 and then either Stop (default) or Start.