4 system params – StorCase Technology InfoStation 12-Bay 4U Ultra160/SATA User Manual

Page 43

RAID Controller Configuration

StorCase Technology, Inc.

InfoStation 12-bay RAID User's Guide - Rev. C00

4 System Params

Password Security

NOTE:

Configuration changes made in the System Params menu must be saved before

changes can take effect. Refer to section "5 NVRAM" for further information.

4 System Params

4.1 Password Info

4.1.1 Password

Check

4.1.2 Set

Password

Enable/Disable

Password Info Menu

4.1 Password Info

This function enables the user to enable password security or change password.

4.1.1 Password Check

Select either Enable or Disable (default). When enabled, the user will be prompted to enter

a password when first accessing the main menu.

4.1.2 Set Password

Enter a password of up to 8 alphanumeric characters. Default password is 00000000.