StorCase Technology InfoStation 12-Bay 4U Ultra160/SATA - Manual (Page 29)

18 RAID Controller Configuration
StorCase Technology, Inc. InfoStation 12-bay RAID User's Guide - Rev. C00
The Main Menu consists of six (6) categories, as shown in Table 3.
Table 3: Main Menu Options
Main Menu
1 RAID Params
2 SCSI Params
(SCSI-to-SATA version only)
or
2 Fibre Params
(FC-to-SATA version only)
3 RS232 Params
4 System Params
5 NVRAM
6 RAID Funcs
0 Quick Setup
Main Menu Options Functions
Quick Setup Quick setup of Single RAID
RAID Params Set parameters for single or multiple arrays
SCSI Params Set SCSI parameters such as SCSI ID, speed, and LUN mapping
(For SCSI-to-SATA version only)
Fibre Params Set fibre parameters such as hard loop ID, connection mode,
(For FC-to-SATA version only)
data rate, LUN mapping and enabling/disabling SAN masking
RS232 Params Set parameters for modem connection and RS232 connection
to terminal
System Params Set/enable/disable password security
Configure fax and pager alert settings
NVRAM Save new configurations and restart RAID controller
RAID Funcs Initialize and check RAID 3/5 arrays
Add/remove disks to existing arrays
View system statistics
Cancel error messages
Alarm settings
Expand array
Update firmware