SpectraCal TVLogic XVM and LEM Series Monitors User Manual
Page 8
17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 |
Upon completion of the AutoCal 3D software LUT calibration process, CalMAN automatically writes
the optimized LUT calibration data into a TVLogic format .lut file in the selected drive location.
TVLogic XVM / LEM Series Monitor LUT Load
When CalMAN completes its automatic 3D LUT calibration, the created software LUT file is ready to
be loaded into an XVM / LEM series monitor. To load a software 3D LUT calibration file into an XVM /
LEM series monitor:
1. Use a null modem serial cable to connect the XVM / LEM series monitor to the CalMAN
computer.
2. Open the TVLogic LutManager software.
3. Under Function, select Import LUT.
4. Under Monitor, select the target colorspace slot on the monitor.
5. Under External LUT, select Assimilate Scratch, then click the […] button and navigate to your
previously selected CalMAN LUT file location.
6. Click the Write button (respond YES to back up any current LUT file).
DONE – TVLogic XVM / LEM monitor 3D LUT calibration and setup is complete.