SpectraCal TVLogic XVM and LEM Series Monitors User Manual
Page 4
17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 |
a. 1D Ramp LUT page
Skip over this page when creating a 3D LUT file for a TVLogic monitor.
b. 3D Cube LUT page
1. On the 3D Cube LUT page, click the AutoCal (circling arrows) button at the right end
of the meter action buttons. The AutoCal Setup dialog then appears (see below).
2. For File Format, select “TVLogic – XVM/LEM series (.lut).”
3. Under File Path, select the desired directory path and provide a name for the LUT file
that CalMAN will create (e.g. monitor ID and date).
4. Under Calibration Type, select the desired type of 3D LUT calibration process.
IR Profile (time based): Creates the best quality display calibration 3D LUT
possible in the selected period of time. You select how much display quality
you have time for, from 30 minutes to maximum display quality (6,000 points
max). Uses Intelligent Resolution Profiling to search out the most nonlinear
color space areas and correct those first.
IR Profile (point based): Creates the best quality display calibration 3D LUT
possible with the selected number of measurement points (1,000 - 10,000
points). Uses Intelligent Resolution Profiling to search out the most nonlinear
color space areas and correct those first.