SpectraCal TVLogic XVM and LEM Series Monitors User Manual
Page 5
17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 |
Lightning LUT: Creates a display calibration 3D LUT in five minutes or less.
Produces a very high quality result on professional displays with moderate
linearity. Displays with significant nonlinearity may produce marginal results.
5. Under Video Range, select "SMPTE (16-235)" if you are calibrating a video display
that clips or compresses signals above reference white, as tested on the CalMAN
Dynamic Range page.
6. Click OK.
Upon completion of the AutoCal 3D hardware LUT calibration process, CalMAN automatically loads
the optimized 17x17x17 LUT calibration data into the TVLogic monitor.
5. Display Validation section
When the cube calibration completes, CalMAN automatically loads the optimized 17x17x17 LUT
calibration data into the TVLogic monitor. You can test the performance of the monitor, in the
Display Validation section of the Color Cube workflow, to validate the accuracy of the monitor when
using the 3D calibration LUT. You can switch back to the Gamma & ColorChecker Pre-Test page to
compare to the pre-calibration performance.
DONE – TVLogic XVM / LEM monitor 3D LUT calibration and setup is complete.