LINK Systems LinkNet II - Manual (Page 71)

6.1.3 Report Machine Selection
Many reports allow the selection of the machine or machines for which they are to be run. For
instance, a report could be run to report only on machine 1234. The dialog box that will appear for these
reports should be similar to Figure 6.3.
Figure 6.3: Report Machine Selection Dialog Box
By default, all machines are included. The left list box shows machines that are not included in the
report. The right side shows machines that are included in the report. Select a machine from the left list
box and hit the “Add” button to move it to the right list box or hit the “Add All” button to include all
machines in the report. Similarly, select a machine from the right hand list and hit the “Remove” button
to transfer it to the left hand list box or hit the “Remove All” button to remove all machines from the
report. When the machines are selected as desired, hit the “OK” button to proceed or the “Cancel”
button to cancel the report.
Manual Version 1.1 10/28/2001 6.3