LINK Systems LinkNet II - Manual (Page 62)

4.15.4 Resetting a Preventive Maintenance Item
When a PM has “tripped” (exceeded its limit), it will appear in the “tripped items” PM report. When
the item has been inspected or serviced, it must be reset for the next interval. Resetting the item leaves
all the information the same except the value, which is reset to zero. The PM history report will show
all the times and at what point this item has been reset.
To reset a PM item, select it from the PM listing dialog of a machine or tool (see Figure 4.39 and
Figure 4.40) and click the “Reset PM Item” button. A message box will appear to asking to verify that
the item is to be reset. Hit “Yes” to reset the item, and “No” to cancel the operation.
Manual Version 1.1 10/28/2001 4.40