Appendix, Input and router defaults, Amplifier and device defaults – Lab.gruppen PLM 20K44 User Manual
Page 69
9. Appendix
PLM+ SERIES Operation Manual rev 1.0.0
69
9.3.2. Input and Router Defaults
Autoselect:
On
Input sensitivity:
+26 dBu
Dante:
Disabled
AES3:
Terminated
Iso-Float:
Enabled
Router 1:
Priority 1 = Dante Receiver (Ch.1)
Priority 2 = Dante Receiver (Ch.5)
Priority 3 = AES1 (Ch.1)
Priority 4 = Analog 1
Router 2:
Priority 1 = Dante Receiver (Ch.2)
Priority 2 = Dante Receiver (Ch.6)
Priority 3 = AES1 (Ch.2)
Priority 4 = Analog 2
Router 3:
Priority 1 = Dante Receiver (Ch.3)
Priority 2 = Dante Receiver (Ch.7)
Priority 3 = AES1 (Ch.3)
Priority 4 = Analog 3
Router 4:
Priority 1 = Dante Receiver (Ch.4)
Priority 2 = Dante Receiver (Ch.8)
Priority 3 = AES1 (Ch.4)
Priority 4 = Analog 4
9.3.3. Amplifier and Device Defaults
Attenuation:
0 dB
Polarity:
Positive (In phase)
Mutes:
Unmuted
Load Model:
No Load Model
Breaker Emulation Limiter: PLM 20K44 - 32A
PLM 12K44 - 25A
IP Configuration:
Auto Zero Conf. (Auto IP)
Dual Redundancy:
Disabled
Dante Slave Only:
Enabled