Denon AVR-3806 - Manual (Page 87)

82
Advanced Setup – Part 2 Advanced Setup – Part 2
Page Default settings Auto Setup / Room EQ
1. Auto Setup/Room EQ
1 Auto Setup
Room EQ
Setup
2
Direct Mode
Setup
4
Set the ON/OFF setting of Room EQ, in the case of the
surround mode is in “Direct” or “Pure Direct”.
3
Mic Input
Select Set this to switch the Mic Input jack for use for Mic or
V.AUX L-channel input terminal.
This unit performs an analysis of the speaker system and
measures the acoustic characteristics of your room to
permit an appropriate automatic setting.
Set the Room EQ setting with All or Assign for each
surround mode.
–
All, Room EQ = OFF
OFF
Mic
9~13
80
80
80
System setup items and default values (set upon shipment from the factory)
Page Default settings Speaker Setup
2. Speaker Setup
1
3
Speaker
Configuration
Channel
Level
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE
for full-size, full-range) to automatically set the composition
of the signals output from the speakers and the frequency
response.
This adjusts the volume of the signals output from the
speakers and subwoofer for the different channels in order
to obtain optimum effects.
Front Sp.
Large
Center Sp.
Surround Sp.
A / B
Subwoofer
Small Small Yes
Front
L & R
Center
Surround
L & R (A)
Subwoofer
12 ft (3.6 m) 12 ft (3.6 m) 10 ft (3.0 m) 12 ft (3.6 m)
Front
L
Front
R
Center Surround R Subwoofer
0 dB 0 dB 0 dB 0 dB 0 dB
Surround Back
Sp.
Small / 2spkrs
4
Distance
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and
subwoofer according to the listening position. Surround
L & R (B)
10 ft (3.0 m)
Surround L
0 dB
Crossover
Frequency Set the frequency (Hz) below which the bass sound of the
various speakers is to be output from the subwoofer.
5 80Hz
75
2
Subwoofer
Setup
This selects the subwoofer for playing deep bass signals. LFE 76
76, 77
77, 78
78, 79
Surround
Speaker
Setup
Use this function when using multiple surround
speaker combinations for more ideal surround
sound. Once the combinations of surround
speakers to be used for the different surround
modes are preset, the surround speakers are
selected automatically according to the
surround mode.
Surround
mode
Surround
speaker
DOLBY/
DTS CINEMA
DOLBY/
DTS MUSIC
WIDE
SCREEN
7 CH
STEREO
DSP
SIMULATION
MULTI CH
MODE
A A A A A A A
6
DOLBY GAME
79
Surround
Back
10 ft (3.0 m)
Surround
Back R
0 dB
Surround
Back L
0 dB