Denon AVR-3806 - Manual (Page 48)

43
Basic Operation Basic Operation
1 Set the input source to “TUNER”.
(Main unit) (Remote control unit
in the AMP mode)
2
Press the TUNER button on
the remote control unit to
select the TUNER mode.
3
Auto tuning
Manual tuning
• When in the auto tuning mode on the FM band, the “STEREO”
indicator lights on the display when a stereo broadcast is tuned
in. At open frequencies, the noise is muted and the “TUNED”
and “STEREO” indicators turn off.
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the “STEREO” indicator turns off.
4 Press the MODE button to set the auto tuning
mode.
• “Auto” appears on the display.
5
Press the TUNING button.
• Automatic searching begins, then stops when a station is
tuned in.
• If tuning does not stop at the desired station, use to the
“Manual tuning” operation.
Listening to the radio
TUNING PRESET
FUNCTION
(Remote control unit)
Check that the remote control unit is set to AMP or TUNER. 1 Set the input source to “TUNER”.
(Main unit)
2 Press the TUNER button on
the remote control unit to
select the TUNER mode.
3
(Remote control unit)
4 Press the MODE button to set the manual tuning
mode.
Check that the display’s “AUTO” indicator turns off.
Watching the display, press the BAND button to
select the desired band (AM, FM or XM).
When listening to the XM Satellite Radio ( page 45). Watching the display, press the BAND button to
select the desired band (AM, FM or XM).
When listening to the XM Satellite Radio ( page 45).
TUNER
MEMORY BLOCK
MEMORY
ON SCREEN
SHIFT
CHANNEL
NUMBER
TUNING
MODE
BAND
TUNER
5 Press the TUNING button to tune in the desired
station.
The frequency changes continuously when the button is
held in.
(Remote control unit
in the AMP mode)