Datalogic Scanning Matrix 400 - Manual (Page 34)

MATRIX 400™ REFERENCE MANUAL
24
2
2.2 INDICATORS AND KEYPAD BUTTON
Figure 19 - Indicators
The following LED indicators are located on the reader:
NET yellow LED indicates connection to the on-board Ethernet network (for Ethernet
models) (Figure 19, 1)
PWR blue LED indicates that the reader is connected to the power supply (Figure 19, 2)
In normal operating mode the colors and meaning of the five LEDs are illustrated in the
following table:
READY green LED indicates that the reader is ready to operate (Figure 19, 3)
GOOD green LED confirms successful reading (Figure 19, 4)
TRIGGER yellow LED indicates the status of the reading phase (Figure 19, 5)
COM yellow LED indicates active communication on the main serial port * (Figure 19, 6)
STATUS red LED indicates a NO READ result (Figure 19, 7)
* When connected to a Fieldbus network through the CBX500, the COM LED is always active, even in the
absence of data transmission, because of polling activity on the Fieldbus network.
During the reader startup (reset or restart phase), these five LEDs blink for one second.
In X-PRESS™ Configuration mode the colors and meaning of these five LEDs are described
in par. 2.4.
The keypad
button (Figure 19, 8), is software programmable. By default it starts the X-
PRESS™ interface for quick installation without using a PC (see chp. 1).
1 2
3
4
5
6
7
8