Hanna Instruments HI 9828 User Manual

Page 41

5.2.1 Lots
This option allows to insert a new lot, to view
logged measurements, to plot data or to delete
lots.
• Scroll with the arrow keys to select the desired

lot and then press OK.

• To create a new lot press the NEW LOT softkey

and insert the identification name with the key-
board. Press OK to confirm.

NOTE

In the upper line of the window, the dis-
play shows the percentage of memory
still available for inserting new data, for
example “Data lots (free: 100%)”.

• After OK is pressed, the meter displays all the

data related to the selected lot: number of
samples, memory space used, time and date of
the first and the last reading.

• If OPTIONS is pressed, a 3-option menu appears:

VIEW to visualize the readings stored in the se-
lected lot; PLOT to visualize the corresponding
graph; DELETE to delete the selected lot.

NOTE

The first line of the 3-option window indicates the lot name.

View
• Press VIEW and the sample details will be displayed.

Use the arrow keys to change the sample number
in the selected lot. The sample number is shown
on the down right corner of the display.

NOTE

Details are available only for the cur-
rently enabled parameters (see section
3.1 “Measurement setup”).

• Press INFO to see the sample number, time and

date, remarks and tag ID or serial number (if
available).

• Press DATA to return to the previous screen or

JUMP to select another sample in the same lot.
If JUMP is pressed a text box appears to insert
the desired sample number.

• Press ESC to return to the 3-option menu.