Hanna Instruments HI 9828 - Manual (Page 39)

39
Chapter 5 - LOGGING MODE
HI9828 HI9828 HI9828 HI9828 HI9828 can store up to 60,000 samples in 100 different lots. The value 60,000
is reached if no remarks are used. When using remarks, the maximum number
of stored measurements decreases, but in practical cases it will never be less
than 50,000.
5.1 LOGGING
• From measurement mode press LOG to store the enabled readings. The de-
fault setting suggests the last used lot to store the sample. Each sample can be
associated to a tag by simply touching the tag with the tag reader.
• The meter asks the location for storing the readings. Press OK to accept the
proposed lot.
• The “SAMPLE LOGGED” message is shown, then the meter returns to the
measurement mode.
5.1.1 Logging options
• To insert additional information for the logged
value or to select the continuous logging mode,
press OPTIONS.
• The following softkeys will appear: “One
sample” and “Continuous”. Select the desired
option.
• To choose the reading storing location, select
an existing lot using the arrow keys and press
OK to confirm. To create a new lot press the
NEW LOT softkey and insert the desired code
in the displayed text box using the keyboard.
Press OK to confirm. If the name already ex-