Hanna Instruments HI 9828 - Manual (Page 14)

14
CONDUCTIVITY
RRRRRange
ange ange ange ange 0.000 to 200.000 mS/cm
(actual EC up to 400 mS/cm)
RRRRResolution esolution esolution esolution esolution
Manual 1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm
Automatic 1 µS/cm from 0 to 9999 µS/cm
0.01 mS/cm from 10.00 to 99.99 mS/cm
0.1 mS/cm from 100.0 to 400.0 mS/cm
Automatic mS/cm 0.001 mS/cm from 0.000 to 9.999 mS/cm
0.01 mS/cm from 10.00 to 99.99 mS/cm
0.1 mS/cm from 100.0 to 400.0 mS/cm
Accuracy Accuracy Accuracy Accuracy Accuracy ±1 % of reading or ±1 µS/cm whichever is greater
Calibration Calibration Calibration Calibration Calibration Automatic at 1 point with 6 memorized standards
(84 µS/cm, 1413 µS/cm, 5.00 mS/cm, 12.88 mS/cm,
80.0 mS/cm, 111.8 mS/cm) or custom point
RESISTIVITY
RRRRRange
ange ange ange ange 0 to 999999 Ω·cm;
(depending on measurement setup) 0 to 1000.0 kΩ·cm;
0 to 1.0000 MΩ·cm
RRRRResolution esolution esolution esolution esolution Depending on resistivity reading
Calibration Calibration Calibration Calibration Calibration Based on conductivity or salinity calibration
TDS
RRRRRange
ange ange ange ange 0 to 400000 mg/L or ppm;
(the maximum value depends on the TDS factor)
RRRRResolution esolution esolution esolution esolution
Manual 1 mg/L (ppm); 0.001 g/L (ppt);
0.01 g/L (ppt); 0.1 g/L (ppt); 1 g/L (ppt)
Automatic 1 mg/L (ppm) from 0 to 9999 mg/L (ppm)
0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt)
0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt)
Automatic g/L (ppt) 0.001 g/L (ppt) from 0.000 to 9.999 g/L (ppt)
0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt)
0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt)
Accuracy Accuracy Accuracy Accuracy Accuracy ±1 % of reading or ±1 mg/L (ppm) whichever is greater
Calibration Calibration Calibration Calibration Calibration Based on conductivity or salinity calibration