Hanna Instruments HI 9828 - Manual (Page 40)

40
ists, a waring message advises the user: “The file already exists! Insert a differ-
ent file name”. Press OK to insert a different file name.
• The “Add remark? Yes or No” window will then appear. If YES is pressed and a
remark list already exists, it is possible to select the desired note or press NEW
to insert a new remark in a text box appears.
• The “Tag reading” option allows to associate
the logged or to be logged samples to a tag.
The message “Touch the tag with the tag
reader” is displayed. Press SKIP if no tags are
available or to skip this option.
• If the tag is touched, the associated ID will be
displayed. If no ID is associated to the tag, the
serial number is shown.
• Press TAG ID to insert an id. code for the used tag and then press OK (or
simply press OK if not interested in a tag ID).
NO NO NO NO NOTES TES TES TES TES A logging list with relative remarks can be created before taking any
measurements and logging. See below paragraph “Log data setup”.
To abort the logging procedure at any time, press the ESC softkey re-
peatedly.
In case of continuous logging, the data collection will start after the last
option is confirmed. In case of one sample logging, the data is stored
after LOG is pressed.
5.2 LOG DATA SETUP
To set lots, insert remarks, review logged or plot-
ted data and to delete lots, from the main menu
select LOG DATA using the arrow keys. Press
OK to confirm the selection.
A list of available functions appears.