Hanna Instruments HI 9828 User Manual

Page 25

Text mode
Original mode

• The meter returns to the “System Setup” menu and the checkbox near the

password entry is signed.

To disable the password proceed as follows:
• Press MODIFY to select the password setup item.
• Insert the password and then press DISABLE. “NO” will appear in the text box.
• Press OK to confirm.

Restore factory settings
It is possible to reset the “System Setup” and “Measurement Setup” parameters to
their default values.
• Select the “Restore factory settings” item and

press OK.

• The meter will ask to confirm: press YES to

confirm or NO to escape.

NOTE

To quit the system setup mode at any time, press ESC. For all setup
items, if the selection is not confirmed, the previous setting will be kept.