3d mode instruction, Auto circling mode instruction, Waypoint navigation flight mode instruction – FeiYu Tech FY-41AP User Manual
Page 35: 7 3d mode instruction, 8 auto circling mode instruction, 9 waypoint navigation flight mode instruction

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 33
10.7 3D Mode instruction
3D Mode
–––– If no input is given by the pilot (all sticks in the middle position), 3D
mode will lock the current aircraft attitude. Therefore the aircraft can be easily
maneuvered to complete a variety of 3D flight with added stability & smoothness.
Attention: Please make sure the RC stick is released when you switch into 3D
Mode.
The FY-41AP can record current RC stick position and lock the flight attitude
when your RC stick released.
10.8 Auto Circling Mode instruction
Auto Circling Mode
–––– On activation, the plane will maintain altitude and flight
speed, while initiating a counterclockwise circle. The centre of the circle is the point of
activation at a default radius of 80 meters (can be changed via FY GCS).
10.9 Waypoint Navigation Flight Mode instruction
Waypoint Navigation Flight Mode
–––– Enable you to fly fully autonomous, with up
to 20 waypoint settings via the FY Ground Control Station (GCS) software.
10.10 Link Mode (RC receiver control mode/Data radio
control mode)
FY-41AP there are two remote control mode, the default setting for the RC receiver
mode. Directly connected to an RC receiver RC mode, selected data transmission with a
remote control adapter plate and several transmission radio remote control radio remote
control mode (you need to buy another ground station upgrade package).
–––– END ––––
Note: We reserve the right to change this manual at any time! And the newest edition will
be shown on our website www.feiyu-tech.com.