FeiYu Tech FY-41AP - Manual (Page 18)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 16
NO. Setup instructions NO. Setup instructions
1 Auto-control rudder surface reverse 10 circling radius setting
2 Control gain 11 Farthest flight distance setting
3 ailerons 12 Airspeed adjust setting
4 Elevator 13 Rudder mixing mode
5 Rudder 14 Initialize gyroscope
6 Throttle 15 Initialize air speed sensor
7 Three-switch mode selection 16 Save the settings
8 FY-41AP install setting 17 Exit the Settings interface
9 Cruising speed setting
Method two: Setting FY-
41AP via “FYGCS 5.11 for FY41AP and Dos”
software
1 ) Please visit the official website : www.feiyu-tech.com . Download the newest setting
software ―FYGCS 5.11 for FY41AP and Dos‖ and the USB driver at the download page
which related to FY
–41AP products.
2 ) Insert the USB data cable into your computer(don't connect any other things into
USB data cable ) , you will find there is more than one port(COM and LPT), the
port―COM1‖in the ―Prolific USB-to-Serial Com Port (COM1)‖ exactly is the Virtual serial
number.
3 ) Install Google Earth plug-in 6.1 version or above.
Two methods to install the plug-in .
Method one : Networking installed directly.
Method two : Install the local plug-in provided by us , you can download at our
official website: www.feiyu-tech.com .
Method for checking whether the Google Earth plug-in have been installed
successfully. Enter the following url :
http://www.google.com/earth/explore/products/plugin.html , If the plug-in have been
installed successfully, you can see the following 3D map directly.