FeiYu Tech FY-41AP - Manual (Page 28)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 26
Step five :The cruise speed and hovering flight radius setting
Target speed setting (Default setting is 60km/h) The flight speed is very
important, you can not optional Settings. The speed must can keep aircraft keep normal
flight. We suggest not increase the settings too high, it may cause very unusual flying
behavior and may result in damage of your aircraft due to excessive throttling.
You can observe the "GPS velocity" on GCS software when in flight, and to
evaluate the aircraft's cruising speed.
Circle radius It means the radius of the hovering flight .Speed of the plane which
achieve 60 km/H , the circle radius should be set to more than 80 meters .We suggest that
the circle radius should be set more than 1.6 times of the flight speed.Such as the speed
of the plane in 100 km/H ,the circle radius suggest that set in 160 meters .If the circle
radius is set too small , hovering flight may not be able to normal ,the plane will decrease
flight altitude, even cause the dangerous of air crash.
Method one: Setting FY-41AP via remote control and OSD overlay menu
You can set the‖ Target speed‖ and the ―Circle radius‖ via the ―Flight‖ option in the
OSD menu (Speed: Target speed , CIR RAD: Circle radiu).
Method two: Setting FY-41AP via “FYGCS 5.11 for FY41AP and Dos”
software