FeiYu Tech FY-41AP - Manual (Page 29)

Guilin Feiyu Electronic Technology Co., Ltd.
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyu-tech.com [email protected]
Page 27
Step six: Gyro and airspeed sensor Initialization
Gyro Initialization : When doing the gyro reset, please keep the aircraft static . It‘s
better to do the gyro reset before each flight.
Airspeed sensor initialization: The aircraft keep static, you can use your hand to
cover the port of the airspeed sensor, and do not let the wind interfere with the airspeed
sensor, then execute the initialization operation .After that please check whether the
airspeed showing on GCS is in the vicinity of 0-3.Due to the sensor error, there are some
tiny airspeed value on the ground is normal.
Method one: Setting FY-41AP via remote control and OSD overlay menu
The ―COMFIG‖ option in the OSD menu (INIT GYRO).
Method two: Setting FY-41AP via
“FYGCS 5.11 for FY41AP and Dos”
software