Datacom Systems J Class - Manual (Page 97)

4-16
Listing the Files on a Data Cassette
Use the following instructions to list the files on a data cassette:
1. Load the data cassette into the tape drive.
2. Click on the Terminal Control on the Front Panel of your
Workspace.
A terminal window opens.
3.
Move the mouse cursor into the terminal window and click the
left mouse button.
4. Enter the following command line to receive a file listing of the
data cassette:
tar –tvf /dev/rmt/3m
Enter
To use the data compression mode, substitute /dev/rmt/3hc for
/dev/rmt/3m.