Installing an eisa or graphics board – Datacom Systems J Class User Manual
Page 178
B-50
Your workstation’s EISA Assembly has five slots. Four are EISA
slots; of these, two are EISA-only and two are EISA/GSC slots. The
bottom slot is GSC only.
The graphics boards supported by your workstation provide:
•
HCRX-8/HCRX-24 Fast 8-plane or 24-plane graphics
•
HCRX-8Z/HCRX-24Z Accelerated 8-plane or 24-plane
graphics
•
CRX-48Z 24-plane Accelerated, double-buffered graphics
NOTICE:
Dual graphics boards take up two slots.
Figures A–30 and A–31 show the physical layout of the EISA/GSC
slots, first from outside the system unit, then from inside the EISA
Assembly.
4
3
2
1
0
graphics 2
graphics 3
graphics 1
graphics 0
Physical Slot Numbers
On Outside of System
Figure A–30. EISA/GSC Slots from Outside the EISA Assembly
Installing an
EISA or
Graphics Board