Datacom Systems J Class - Manual (Page 236)

D-19
The following sample screen output using the memory command
shows first, a memory configuration table with properly-installed and
configured memory (Sample Output 1); and second, output when a
SIMM has been improperly installed (Sample Output 2).
To display the current memory configuration for your system, from
the Information Menu of the boot console interface, follow the direc-
tions in “Accessing the Boot Console Interface” earlier in this appen-
dix. Once you are in the Boot Console Interface Main Menu, type:
Main Menu: Enter a command or a menu > information Enter
This places you in the Information Menu. From here type:
Information Menu: Enter command > memory Enter
The screen displays a list of the current memory SIMMs configured
for your workstation.
Sample Output 1
The following sample shows the memory configuration table when
memory SIMMs are properly installed and configured.
MEMORY INFORMATION
DETAILED MEMORY CONFIGURATION TABLE
SPA GROUP SMC SMC Status Bank Bank Status Size Slot/Sys Brd
––– ––––– ––– –––––––––– –––– ––––––––––– –––– ––––––––––––
0x00000000 0 0 Configured 3 Configured 16MB 0a/b
1 Configured 0 Configured 16MB 2a/b
2 Configured 0 Configured 16MB 0a/b
3 Configured 3 Configured 16MB 2a/b
0x04000000 1 1 Configured 3 Configured 64MB 1a/b
3 Configured 0 Configured 64MB 1a/b
Group 0 interleaved 4 ways over 4 banks
Group 1 interleaved 2 ways over 2 banks
Displaying the
Current
Memory
Configuration