Datacom Systems J Class - Manual (Page 179)

B-51
Slot 2
Slot 1
Slot 0
Slot 3
Slot 2
Slot 1
Slot 4
GSC Slots EISA Slots
Bottom
of EISA
Assembly
Slot Numbers
on Board
Figure A–31. EISA/GSC Slots from Inside the EISA Assembly
Physical slot 0 is always reserved for graphics cards only.
graphics0 Graphics device in slot 0. If using a Dual Graphics Card,
this is the port to the right on the card when facing the back of the
workstation.
graphics1 Graphics device in slot 1. If using a Dual Graphics Card,
this is the port to the right on the card when facing the back of the
workstation.
graphics2 Graphics device in slot 2. If there is a Dual Graphics
Card in slot 1, this is the port to the left on the card when facing the
back of the workstation.
graphics3 This is a logical slot, and can only be reached by using
the left port of a Dual Graphics Card in physical slot 0.
NOTICE: We do not recommend using a Dual Graphics
Card in slot 2, other than the CRX/HCRX. If
running 9.05, you can only use a maximum of 2
graphics cards, with the exception of using the
dual graphics card. If using the dual graphics
card, it must be the only card in the system and
be physically located in slot 0.