Datacom Systems J Class User Manual
Page 167
B-39
Memory SIMMs
Position Guide
Figure A–21. CPU Assembly Orientation
7.
Refer to the Position Guide on the CPU board that states,
“<–– POSITION MEM MODULE AS SHOWN,” as shown in
Figure A–21.
8.
Install pairs of SIMMs in the following order: Pair 1 (0A, 0B),
Pair 2 (1A, 1B), Pair 3 (2A, 2B), and so on.
This workstation has 16 memory slots, labeled 0A, 0B through
7A, 7B. Memory can be configured from 32 MB to 256 MB
installed in pairs of 16 MB SIMMs. Memory can be configured
from 128 MB to 768 MB (128 MB to 1 GB if you are running
HP-UX 10.0), installed in pairs of 64 MB SIMMs, or memory
can be configured from 32 MB to 768 MB (1 GB if you are run-
ning HP-UX 10.0) in combinations of pairs of 32 MB and 128
MB SIMM pairs. Memory SIMMs must be installed in pairs of
equal size, with 128 MB SIMM pairs installed first, followed by
32 MB SIMM pairs. Figure A–22 gives the recommended order
for installing pairs of SIMMs.