Datacom Systems J Class - Manual (Page 124)

6-13
The windows are as follows:
Window 1
When the system is hard booted, the LCD will be cleared and the fol-
lowing message will be displayed for approximately 1 second. Then
the processor dependent hardware (pdh) is verified.
Proceeding To <– line 1
Turn DC On <– line 2
Window 2
While the pdh is being verified, the following message is displayed:
ZZZZ YYYY <– line 1
Selftest Sys Bd <– line 2
Window 3
After the pdh is verified, the selftest is executed. The display changes
to:
ZZZZ YYYY
♥
<– line 1 – ’
♥
’ flashes with Z Y field change
Selftest <– line 2
Window 4
When the selftest is complete, the message (once the console is
found) is:
ZZZZ YYYY CPUXX
♥
<– line 1 – ’
♥
’ flashes with Z Y field change
AAAAAAAA console <– line 2
where AAAAAA is RS-232A, RS-232B, or GRAPHICS.