Datacom Systems J Class User Manual
Page 42
1-24
Terminal Control
A terminal window opens.
3.
Move the mouse cursor into the terminal window and single-
click the left mouse button.
4.
If you are using HP-UX 9.05, enter the following at the prompt:
/etc/lanscan
Enter
If you are using HP-UX 10.0 or later, enter the following at the
prompt:
/usr/sbin/lanscan
Enter
You will see a table similar to the following.
Hardware Station
Dev
Hardware
Net-Interface
NetMgt
Encapsulation
Path
Address
lu
State
NameUnit State
ID
Methods
2.0.2
0x0800091595EE
0
UP
lan0
UP
4
ETHER IEEE8023
The LANIC ID in this example is 0800091595EE.