Datacom Systems J Class - Manual (Page 242)

D-25
The LAN station address is displayed as a twelve-digit number in
hexadecimal notation, similar to the following:
LAN Station Addresses: 123456–789abc
The address is for the system’s built-in LAN.
The all command allows you to display the system’s processor revi-
sion and speed, cache size, memory size, flag settings, and the boot
and console paths. To display system information, from the Informa-
tion Menu type the following at the prompt:
Information Menu: Enter command > all Enter
This information is paged to allow you to view it as necessary.
The pim command allows you to display the most recent PIM in-
formation for the specified fault type. To display PIM information for
a specific fault, from the Service Menu type the following at the
prompt:
Service Menu: Enter command > pim processor_number Enter
You can use pim in the following ways:
pim – gives all processors/all fault types
pim processor_number – HPMC information on given processor
pim processor_number fault_type – fault type information on given
processor
Displaying
System
Information
Displaying PIM
Information