12 inspecting fibers with the fip, Mportant – EXFO FOT-930 Multifunction Loss Tester User Manual
Page 71

Multifunction Loss Tester
63
12 Inspecting Fibers with the FIP
The fiber inspection probe allows you to find dirty or damaged connectors
by displaying an enlarged view of the connector surface.
The following common features of video fiber inspection probes are
compatible with your unit:
Magnification control: supports 200x, 400x or other zoom factors.
Focus control: allows you to fine-tune the display quality.
Image capture: freezes the image on the FOT-930 display by pressing a
button.
For more information, refer to the user guide that came with your probe.
To access Probe mode on your unit:
1. Connect the probe to the right side of the unit, using an adapter if
necessary.
2. Activate the probe display using one of the following:
Press Menu, then select Probe.
Press the button on the probe (some models only).
To adjust brightness or contrast:
Brightness: use up/down arrows.
Contrast: use left/right arrows.
To exit Probe mode and return to the regular display:
Press Esc or Menu.
I
MPORTANT
When another unit requests a F
AS
T
ES
T with your unit, the F
AS
T
ES
T
takes over and Probe mode is interrupted.
You cannot receive text messages or talk set calls while using
Probe mode.