Power sources, Typical applications, Power sources typical applications – EXFO FOT-930 Multifunction Loss Tester User Manual
Page 12: Mportant

Introducing the FOT-930 Multifunction Loss Tester
4
FOT-930
Power Sources
Power Sources
The unit operates with the following power sources:
AC adapter/charger (connected to standard power outlet—indoor use
only). Compatible car outlet adapter available upon request
One or two Lithium-Ion rechargeable batteries (automatically take
over if you unplug the AC adapter/charger)
Field-changeable without affecting operation
Automatic recharge when AC adapter/charger connected
CR2032-type Lithium cell battery (for clock only, used when
Lithium-Ion batteries and DC power are both unavailable)
Typical Applications
You can use the Multifunction Loss Tester for several applications, such as:
Fiber installation and maintenance applications
FTTx: testing of passive optical networks (PONs)
Absolute power or link loss measurements
Bidirectional loss and ORL testing
Length measurement
All-in-one tool for contractors
I
MPORTANT
Batteries are not charged at the factory. Fully charge them (about
4 hours) before using the unit for the first time.