EXFO FOT-930 Multifunction Loss Tester - Manual (Page 32)

24 FOT-930
Setting Autonaming Scheme
Setting Autonaming Scheme
Initially, the unit suggests cable and fiber names based on autonaming
settings. After saving a result, the unit prepares the next fiber name by
incrementing the suffix (or by adding “001” to a name with no suffix).
When you manually change the name for the first time (in Power Meter,
ORL Meter or
F AS T ES T), the unit then ignores autonaming settings.

Cable names: maximum 21 characters for prefix, 3 digits for number
(or 24 characters when name is manually set)

Fiber names: maximum 12 characters for prefix, plus 3-digit suffix
(duplicate names allowed when name is manually set)
Note: If you manually change a fiber name, then turn the unit off without saving
at least one result, this name will be discarded.
I
MPORTANT
To start using new autonaming settings, you must delete all cables
from memory.