EXFO FOT-930 Multifunction Loss Tester - Manual (Page 28)

Customizing Your Multifunction Loss Tester
20 FOT-930
Activating and Setting Screen Saver and Auto-Off
Activating and Setting Screen Saver and
Auto-Off
When you do not use the unit for a while, the display may be dimmed to
save power. Your unit may also turn itself off completely.
You can set idle durations for DC and battery operation. Values are kept in
memory when you turn the unit off. You may also
revert to factory settings
at any time.
Note: The ON/OFF button blinks to indicate screen saver activation, but unit
operation is not interrupted. Press any key to deactivate the screen saver.
To activate/deactivate the screen saver or auto-off:
1. Press Menu, then select Setup > Unit.
2. Press Next Tab (F1/F2 key) until you get to
the Power tab (for auto-off) or Display tab
(for screen saver).
3. Use the up/down arrows to select the battery
or AC adapter duration list, then press Enter
to open the list.
4. With the current duration highlighted, use the up/down arrows to
select the desired duration (or Never), then press Enter to confirm.
To revert unit to factory-default settings:
1. Press Menu, then select Setup > Unit.
2. Press Factory Settings (F1/F2 key). Values on all tabs of the Unit Setup
pane are returned to factory settings.