EXFO VDSL2 - Manual (Page 140)

Getting Started with DSL and Ethernet Testing
132 AXS-200/635
DSL/IP Tests
When selected, each of the five tests starts, using the connection setup
from the current profile.
³
Connection Setup allows you to setup a series of connection
parameters for Auto Test and CPE testing, IPTV, data, and VoIP
analyses beginning with the Selected Profile tab.
³
Configure Tests allows you to configure a series of test parameters
to verify applications, beginning with Auto Test.
³
Read Saved Result allows you to view the Read Results page.
Read Saved Results
The Read Results pane tab allows you to select a test type and view the
results of all the files previously saved.
Types listed include the following
Ethernet and DSL tests:
³
CPE Test
³
IPTV Analysis
³
Data Analysis
³
VoIP Analysis
To open previously saved test
results:
1. Press
to open the list.
2. In the list, press the up/down arrows to select the test type.
3. Press to confirm the selection.
4. Press the down arrow to activate the Result Files list box and
press to display the list of available files.
5. Press the up/down arrows to select the desired result file.
6. Press to view the selection.