Initializing tpm, Dinitializing tpm, Figure d - 27 – Eurocom R130T ELEMENT User Manual
Page 251
Windows XP Information
Trusted Platform Module D - 43
D
Initializing TPM
1.
To initialize the TPM it may be necessary to first clear any existing TPM information
if applicable.
2.
Enter the PhoenixBIOS Setup Utility by pressing F2 during the POST.
3.
Use the arrow keys to select the TPM State menu.
4.
Select TPM State, and set the item to Clear.
5.
Press F10 to save the changed BIOS information, exit the BIOS and restart the
computer.
6.
If you make any changes to the TPM State you will be asked to Execute/Reject the
change after restart (
“Physical Presence Operations” on page 5 - 13
).
Figure D - 27
TPM State - Clear
Main
Advanced
Security
Boot
Exit
F1
Help
Select Item
-/+
Change Values
F9
Setup Defaults
Esc
Exit
Select Menu
Enter
Select
Sub-Menu
F10
Save and Exit
Item Specific Help
Changes TPM State
TPM State
Current TPM State:
Enabled and Deactivated
Change TPM State
[
Clear
]
No Change
Enable & Activate
Deactivate & Disable
Clear
Phoenix TrustedCore(tm) Setup Utility