Eurocom R130T ELEMENT - Manual (Page 200)

Intel Video Driver Controls
B - 8 Display Modes
B
To Enable Intel(R) Dual Display Clone
1. Attach your external monitor to the external monitor port, and turn it on.
2. Go to the Intel Graphics Properties control panel (see “Intel Graphics
Properties” on page B - 2 ) and click Display Devices.
3. Click to choose Intel(R) Dual Display Clone (Operating Mode).
4. Click Apply, and OK to confirm the settings change.
5. Click Display Settings to adjust the settings for the attached devices.
Figure B - 6
Display Devices &
Settings