Eurocom R130T ELEMENT - Manual (Page 112)

Modules & Options
7 - 8 Trusted Platform Module
7
6. Use the arrow keys to select the TPM State menu.
7. Select TPM State, and set the item to Enable & Activate.
8. Press F10 to save the changed BIOS information, exit the BIOS and restart the
computer.
9. If you make any changes to the TPM State you will be asked to Execute/Reject
the change after restart (
“Physical Presence Operations” on page 5 - 15 ).
10. You can now install the TPM driver (see “Trusted Platform Module (TPM)” on
page 4 - 6 ).
Figure 7 - 6
TPM State
Main Advanced Security Boot Exit
F1 Help Select Item -/+ Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Changes TPM State
TPM State
Current TPM State: Enabled and Deactivated
Change TPM State [ No Change ]
Phoenix TrustedCore(tm) Setup Utility
No Change
Enable & Activate
Deactivate & Disable
Clear