beautypg.com

Keyboard wedge/usb keyboard — cont – Datalogic Scanning QUICKSCAN QS6500BT User Manual

Page 68

background image

Interface Related Features

4-32

QuickScan

®

QS6500/QS6500 BT

Keyboard Wedge/USB Keyboard — cont.

Wedge Quiet Interval

Quiet Interval is the amount of time to look for keyboard activity before
the imager breaks the keyboard connection in order to transmit data to
the host..

NOTE

This feature does not apply to the USB Keyboard
interface.

START

MODE

BARCODE

Selectable from 00 (no interval) to 255 in 10 msec
increments. Use hexidecimal (range: 00 to FF hexidec-
imal) to set the interval. To configure this feature, scan
the “START” bar code above to place the unit in Pro-
gramming Mode, then the

Set Wedge Quiet Interval

bar code followed by the digits from the Alphanumeric
table in

Appendix B, Alpha-Numeric Pad

represent-

ing your desired length. Accept your selection by scan-
ning the “SET” bar code below and finally, exit
programming mode by scanning the “END” barcode
below

DEFAULT SETTING FOR THIS FEATURE:

01 (10 msec)

Set Wedge

Quiet Interval

SET

END