Standard 2 of 5, Disable/enable standard 2 of 5, Checksum verification – Datalogic Scanning QUICKSCAN QS6500BT User Manual
Page 252: Checksum transmit
Symbologies
6-164
QuickScan
®
QS6500/QS6500 BT
Standard 2 of 5
The following options apply to the Standard 2 of 5 symbology.
Disable/Enable Standard 2 of 5
When this feature is disabled, the imager will not read Standard 2 of 5
bar codes.
Checksum Verification
When enabled, the imager will verify the checksum of the labels.
Checksum Transmit
When this option is enabled, the imager will transmit the checksum.