Datalogic Scanning QUICKSCAN QS6500BT - Manual (Page 300)

Bluetooth Features
7-4 QuickScan ® QS6500/QS6500BT
Leash Alarm
When enabled, the Leash Alarm will force the imager to sound an alarm
for a preprogrammed length of time to notify if an imager is leaving the
immediate vicinity of the Base Station. This is especially useful in
instances where the imager might inadvertently have been placed in a
bag or cart.
For this mode to be effective, Deep Sleep Mode must be disabled. If the
imager is asleep, there is no way for it to know where it is relative to the
Base Station because communication is not active between the devices.
START
DURATION BARCODE
Disable Alarm
1 Second
2 Seconds
3 Seconds
4 Seconds
5 Seconds
6 Seconds
7 Seconds
8 Seconds