Digi X2 User Manual
Page 28
F e a t u r e s
2 8
Use SNMP as primary
configuration interface
Basic network and serial settings configurable through standard
and Digi-specific Management Information Blocks (MIBs).
More advanced settings must be set through the web or
command-line user interfaces, and sending alarms as SNMP
traps must be configured through the web interface, on the pages
listed above.
System information: assign system-
identifying information to a device
Configuration > System > Device Identity Settings
Socket Tunnel Settings
Configuration > Network > Socket Tunnel Settings
Statistics for Digi devices
Administration > System Information 176
Status of Digi devices
Management > Serial Ports, Connections, Network Services
VPN (Virtual Private Network) To
configure
VPN:
Configuration > Network > Virtual Private Network (VPN)
Settings
To manage VPN:
Management > Connections > Virtual Private Network
(VPN) Connections
Feature/task
Path to feature in the web interface
See page