Digi X2 User Manual
Page 25
2 5
I n t r o d u c t i o n
Mesh network:
Mesh network configuration
through web UI
Configuration > Mesh Network
Mesh network configuration
through Connectware Manager
Mesh network monitoring/
management through web UI
Administration > System Information > Mesh Network
See also Connectware Manager’s Mesh Network view and
detailed view of network nodes
Mesh network monitoring/
management through command
line
set mesh
display mesh
info zigbee_sockets
Mobile (cellular) settings:
Provisioning CDMA cellular
modules
Configuration > Mobile
For Digi Cellular product that have a CDMA cellular module,
provisioning must be performed once.
To launch a wizard for provisioning the module, go to
Configuration > Mobile. Under Mobile Service Provider
Settings, click the Provision Device button.
Provisioning can also be performed from the command line:
To display existing provisioning parameters:
“display provisioning” -- see "display" on page 30
To provision the CDMA module: "provision" on page 59
Mobile service provider and
connection settings
Configuration > Mobile
Settings displayed vary by mobile service provider.
SureLink™ Settings
Configuration > Mobile > SureLink Settings.
Feature/task
Path to feature in the web interface
See page