Digi X2 - Manual (Page 24)

F e a t u r e s
2 4
Ethernet settings Configuration > Network > Advanced Network Settings 118
Help on configuring features Help button on each page.
Host name for a device Configuration > Network > Advanced Network Settings >
Host Name 118
Industrial Automation (IA) Configuration > Serial Ports > Select Port Profile >
Industrial Automation
The Industrial Automation port profile should address most
configuration scenarios. To fine-tune your IA settings, use the
“set ia” command from the command line. See the set ia
command description in the Digi Connect Family Command
Reference.
For additional information on configuring Industrial
Automation, see this web site:
http://www.digi.com/support/ia
166
IP address settings:
Using static IP addresses Configuration > Network > IP Settings 64, 64,76
Using DHCP Configuration > Network > IP Settings and
Configuration > Network > DHCP Server Settings
65, 76, 77
Using Auto IP Configuration > Network > Advanced Settings 65, 118
IP filtering / access control Configuration > Network > IP Filtering Settings 90
IP forwarding: Network Address
Translation (NAT) and port
forwarding configuration/static routes Configuration > Network > IP Forwarding Settings 91
IP pass-through Configuration > Network > IP Pass-through 94
Feature/task Path to feature in the web interface See page