beautypg.com

9 backboard to system pcb connector, Backboard to system pcb connector – ADLINK MXC-6300 Series User Manual

Page 45

background image

Introduction

33

MXC-6300

operate in IDE or AHCI mode in BIOS.This SATA connector is
designed to support a 2.5 inch hard disk drive (HDD) or solid state
disk (SSD). The HDD or SSD must be installed into the SATA con-
nector with a HDD bracket. Please refer to Section 3.1 for installa-
tion of a 2.5 inch HDD or SSD.

1.7.9

Backboard to System PCB Connector

This connector connects the backboard to a golden finger-
equipped mainboard PCB.

See also other documents in the category ADLINK Hardware: