ADLINK MXC-6300 Series - Manual (Page 30)

18 Introduction
1.6.4 USB 2.0 Ports
The MXC-6300 provides two USB 2.0 ports supporting Type A
USB connection on the front panel. All USB ports are compatible
with high-speed, full-speed and low-speed USB devices. The
MXC-6300 supports multiple boot devices, including USB flash
drive, USB external hard drive, USB floppy, USB CD-ROM and
others. The boot priority and boot device can be configured in
BIOS. Please refer to Section B.4: Boot on page 74 for details.
1.6.5 USB 3.0 Ports
The MXC-6300 provides four USB 3.0 ports supporting Type A
USB3.0 connection on the front panel. All USB3.0 ports are com-
patible with super-speed, high-speed, full-speed and low-speed
USB devices.
1.6.6 Gigabit Ethernet Ports
The MXC-6300 has two Gigabit Ethernet ports on the front panel,
supporting Intel WGI210IT GbE and WG82579LM Gigabit Ether-
net PHY controllers.
WG210IT provides:
X
IEEE 802.3az Energy Efficient Ethernet
X
IEEE 1588/802.1AS precision time synchronization
X
IEEE 802.3Qav traffic shaper
X
Interrupt moderation, VLAN support, IP checksum offload
X
PCIe OBFF (Optimized Buffer Flush/Fill) for improved sys-
tem power management
X Four transmit and four receive queues
X RSS and MSI-X to lower CPU utilization in multi-core sys-
tems
X
ECC - error correcting memory in packet buffers
X
Wake-On-LAN
X
NC-SI for increased bandwidth passthrough
X
Preboot eXecution Environment (PXE) flash interface
X
Jumbo frame support