R-d^ (j-d, Recording from the radio, 1 insert a cassette – Aiwa CSD-EX110LH User Manual

Page 22: 2 set the function switch to radio, 3 select a band, 4 turn the tuning control to tune in to a station, 5 press the • rec button to start recording, To stop recording, When the end of the tape is reached, 1 set the function switch to power off/tape

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

FUNCTION

CSD-EX110U

CSD-EX110LH

AM FM

I I

MW SW FM

r-d^ (j-d^

BAND

TUNING

RECORDING FROM THE RADIO

Recording is done on the side facing the cassette hoider.

1 Insert a cassette.

The side to be recorded on

2 Set the FUNCTION switch to RADIO.

OPE/BATT indicator iights.

3 Select a band.

4 Turn the TUNING control to tune in to a station.

5 Press the • REC button to start recording.

To stop recording

Press the B/^ STOP/EJECT button.

When the end of the tape is reached

The tape stops. To record on the other side, turn the cassette over and

press the • REC button again.

If a high-pitched sound is heard during recording from AM/
MW4 □

Set the FM MODE/OSC switch to the position that gives iess noise.

Usabie tapes

Use normal (type I) tapes for recording. If you use metal (type IV) or

chrome (type II) tapes, sound that has been already recorded may not

be erased completely.

• Do not set the FUNCTION switch to POWER OFF/TAPE or CD during

radio recording.

• You cannot listen to a cassette or a compact disc during radio

recording.

• If the erasure prevention tab is broken off, the • REC button cannot

be depressed.

• The output voiume and tone have no effect on recording even if they

are adjusted.

To erase the recording

1 Set the FUNCTION switch to POWER OFF/TAPE.
2 Insert a cassette with the side to be erased facing you.
3 Press the • REC button to start erasing.