Recording from a compact disc, 1 insert a cassette, 2 set the function switch to cd – Aiwa CSD-EX110LH User Manual
Page 20: 3 place a disc with the label facing up, 4 press the ll pause button, 5 press the • rec button, 6 press the ^il play/pause button to start cd play, 7 press the ll pause button to release it, To stop recording, After recording
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
STOP/EJECT
TAPE RADIO CD
(I—
FUNCTION
TRACK
n
u
PAUSE
psfT
or: RECORDING FROM A COMPACT Recording is done on the side facing the cassette hoider. 1 Insert a cassette. (D The side to be recorded on 2 Set the FUNCTION switch to CD. OPE/BATT indicator iights. 0 is displayed in the TRACK display. 3 Place a disc with the label facing up. 4 Press the ll PAUSE button. 5 Press the • REC button. The ◄ PLAY button is pressed simultaneously. 6 Press the ^il PLAY/PAUSE button to start CD play. 7 Press the ll PAUSE button to release it. Recording starts. To stop recording Press the m/A STOP/EJECT button. After recording Set the FUNCTION switch to POWER OFF/TAPE. When the end of the tape is reached The tape will stop. To record on the other side, turn the cassette over and press the • REC button again. Usable tapes Use normal (type I) tapes for recording. If you use metal (type IV) or chrome (type II) tapes, sound that has been already recorded may not be erased completely. ' Do not set the FUNCTION switch to POWER OFF/TAPE or RADIO during CD recording. ' You cannot listen to a cassette or the radio during CD recording. ' If the erasure prevention tab is broken off, the • REC button cannot be depressed. ' The output volume and tone have no effect on recording even if they are adjusted. 20
DISC_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _