Aiwa NSX-V9000 - Manual (Page 9)

PRESETTING STATIONS
1
2
ICLEAR
-0~9,+10
The unit can store a total of 32 preset stations. When a station
is stored, a preset number is assigned to the station. Use the
preset number to tune In to a preset station directly.
1 Press the TUNER/BAND button to select a band,
and press the K4 DOWN or UP button to
select a station.
2 Press the II SET button to store the station.
A station is assigned a preset number, beginning from 1 in
consecutive order for each band.
Use the remote control to select the preset number directly.
1 Press the TUNER/BAND button to seiect a band.
2 Press the numeric buttons to seiect a preset
number.
Example:
To select preset number 25, press the +10, +10 and 5 buttons.
To select preset number 10, press the +10 and 0 buttons.
Selecting a preset number on the main unit
Press the TUNER/BAND button to select a band. Then, press
the DIRECTION/PRESET button repeatedly.
Each time the button is pressed, the next highest number is
selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the ■ CLEAR button, and press the
II SET button within 4
seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
PRESET NUMBER TUNING
Z
o
J Q uj
Zu
3UJ
occ
<
cc
Frequency
:[-l UIIJ.
J
Preset number
3 Ftepeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
have already been stored for all the bands.
ENGLISH
8