Aiwa NSX-V9000 - Manual (Page 23)

SPECIFICATIONS Speaker system SX-NAV^900
Cabinet type
Main unit CX-NV9000
FM tuner section
Tuning range
Usable sensitivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Total harmonic distortion
Inputs
Outputs
Cassette deck section
Track format
Frequency response
Signal-to-noise ratio
Recording system
Heads
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz
step)
531 kHz to 1602 kHz (9 kHz step)
350 pV/m
Loop antenna
120 watts per channel, Min.
RMS at 6 ohms, from 50 Hz to
20 kHz, with no more than 1 %
Total Harmonic Distortion
0.1 % (75 W, 1 kHz, 6 ohms, DIN
AUDIO)
VIDEO/AUX: 200 mV (adjustable)
MIC 1, MIC 2:1.3 mV (10 kohms)
LINE OUT: 200 mV
SUPER WOOFER: 2.7 V
SPEAKERS: accept speakers of
6 ohms or more
SURROUND SPEAKERS:
accept speakers of 16 ohms or
more
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
Cr02 tape: 50 Hz - 16000 Hz
Normal tape: 50 Hz - 15000 Hz
60 dB (Dolby B NR ON, Cr02 tape
peak level)
AC bias
Deck 1: Playback head
x 1
Deck 2: Recording/playback/
erase head
x 1
Compact disc player section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter Semiconductor laser
{X = 780
nm)
1 bit dual
90 dB (1 kHz, 0 dB)
0.03 % (1 kHz, 0 dB)
Unmeasurable
Speakers
Impedance
Output sound pressure level
Dimensions (W x H x D)
Weight
General
Power requirements
Power consumption
Dimensions of main unit
(W x H X D)
Weight of main unit
3 way, bass reflex (magnetic
shielded type)
Woofer:
140 mm (5Vs in.) cone type
Tweeter:
60 mm (2% in.) cone type
Super tweeter:
20 mm ('Vi6 in.) ceramic type
6 ohms
87 dB/W/m
235
X 302 X 250 mm (9% x 12 x
97s in.)
3.5 kg (7 lbs 11 oz.)
120 VAC, 60 Hz
120 W
260
X
308
X
344 mm
(10V4X 12V4X 13% in.)
8.9 kg (19 lbs 10 oz.)
CO
z
o
UJ <
z cc
Z LU
oz
u UJ
tr“
UJ
X
Specifications and external appearance are subject to change without
notice.
U liU SYSTEM
The word “BBE” and the “E3BE symbol” are trademarks of BBE
Sound, Inc.
Under license from BBE sound, Inc.
DOLBY NR
Dolby noise reduction manufcictured under license from Dolby
Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol □□ are trademarks of Dolby
Laboratories Licensing Corporation.
COPYRIGHT
Please check the laws on copyright reiating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTfON
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
ENGLISH
22